Impartial advise and recommendations to improve your design process

Gain access to our Technical Consultants entirely free of charge. This non-chargeable day will provide you with dedicated access to one of our highly regarded Technical Consultants enabling you to gain an impartial assessment of your design process.

What does the assessment entail?

We’ll conduct a thorough review of your current design to manufacture process identifying key challenges and business priorities and then make recommendations to help you eliminate these issues and improve efficiency so that you can get to market faster. Areas typically covered during the Design Process Review include:

  • Reviewing what your current design to manufacture process looks like.
  • The impact of these processes on other departments such as Sales and Engineering to identify any bottlenecks.
  • Identifying where and how design automation may be implemented to streamline your design process.
  • Commercial discussion to capture your business drivers and goals
  • Assess what CAD technology is already in place and how it is utilised within your business
  • Assess skill level and capability of existing users
  • Review available resources within your company to assist the needs of the Design Department
  • Identify suggested priorities for addressing challenges
  • Provide recommendations for appropriate technology demonstration

Get in touch with one of our experts.

Send us your details. We'll do the rest.
  • We will only use your information for the purpose of which you are providing it. Please note you can unsubscribe at any time:
  • This field is for validation purposes and should be left unchanged.

Why you should partner with us

  • "We trust Majenta Solutions because everyone we speak to has made a real effort to understand our business and our priorities. And we have noticed that because the training we received was so thorough we do not often get stuck, we really have not had to make many requests for support."

    Martin Peach

    Quality Manager/CAD Engineer, Barrier Division
    Hill and Smith Ltd

  • "I found the Inventor course very useful and I definitely learned some valuable skills. The staff were really helpful, especially the instructor who was very knowledgeable and taught me a lot of skills relating to my own job"

    Michael Dunne

    Protex Fasteners Ltd

Contact Us